Installation

  1. Make sure your arcade cabinet/supergun is OFF
  2. Plug in the RECO PCB to the JAMMA harness of your arcade cabinet/supergun, and then plug in JAMMA PCB game to the RECO
  3. The RECO PCB is marked as top, additionally, two white triangles on both sides of the PCB indicate the “JAMMA KEY"
  4. Connect the kick harness for additional buttons if necessary.
  5. Power on the arcade cabinet/supergun
  6. If everything works correctly, both status LEDs of the RECO PCB will blink rapidly for a second on the arcade cabinet/supergun start-up